Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution wasinstalled inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution was installed inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution was installed inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution was installed inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution was installed inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution was installed inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution was installed inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution was installed inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.
Basement Waterproofing
As noted on our agreement, we installed 150 feet of Waterguard interior drainage system around the perimeter of the basement. The purpose of the Waterguard system is to relieve the hydrostatic pressure at the floor and wall joints, coming from water pressure trying to make its way through the foundation wall. It also will relieve the pressure from beneath the slab. The WaterGuard will act as the conduit for water travel underneath the basement floor freely to the sump pump to keep the basement dry. We dug about a 12 inch wide trench around the perimeter of the basement, and we removed the concrete to expose the footing and wall joints. A filter cloth was then installed as well as a bed of stone for drainage, and the Waterguard system was incorporated into the bed of stone. Finally, the floor was put back together, and cleanouts were installed to inspect and maintenance the system throughout the years. In the existing sump pump a new zoeller M-53 sump pump and Battery Back Up Solution was installed inside of the existing pit, and the existing pit was cleaned of sediment and debris. The plumbing was reworked to accommodate the new pump and the discharge was tied into the Ice Guard fitting. The piping was buried 40 feet from the foundation towards the fence line on the west side of the house and terminated into a drywall box. A Zoeller Wi-Fi alarm was also installed inside of the existing basin, and it was placed at the elevation of the Battery Back Up Solution. In the egress wells, a well duct system was installed in order to channel water if the egress was to have standing water. A Well Duct will guide that water to our perimeter system.